Euromecc Dynamic mixer arises from the revision of twin shaft mixer “MEB” for single cycle production.
Through accurate modifications applied to shafts, axles and mixing blades, we achieved to satisfy, in a “dynamic” manner, both “batch” and “continuous” production modalities.
The mixing bin was substantially extended and on the bottom we made two openings fitted with exhaust hatches that can be opened oleodinamically. Both exhaust hatches become subservient during the “discontinuous” functioning, while the hatch located at far end of the bin keeps working during the “continuous” functionality.
Through accurate modifications applied to shafts, axles and mixing blades, we achieved to satisfy, in a “dynamic” manner, both “batch” and “continuous” production modalities.
The mixing bin was substantially extended and on the bottom we made two openings fitted with exhaust hatches that can be opened oleodinamically. Both exhaust hatches become subservient during the “discontinuous” functioning, while the hatch located at far end of the bin keeps working during the “continuous” functionality.
| TECHNICAL
FEATURES |
UM
|
VALUE |
|---|---|---|
| Dry capacity |
l
|
4.200
|
| Fresh concrete output | l |
3.360
|
| Vibrated concrete output |
l
|
2.800 |
| Mixing motors power | kW |
2x55
|
| Hidraulic power | kW |
2,2 |
| Continuous output |
m3/h
|
300
|
| Mixing arms | n |
20 |
| Dry weigh |
kg
|
8100 |
| Max. aggregates size | mm |
50 |
STANDARD EQUIPMENT
-
High quality materials and components ensure maximum wear resistance:
- Arms in spheroidal cast-iron GS 600
- Bushings for mixing axle protection. Gasket system connected with polyurethane rings and mechanic seals in grinded steel and grease pumping inside the seals compartments, for perfect greasing and insulation.
- Tank with staggered plates for wear reduction, equal to the material, with consequent reduction of maintenance costs.
- Automatic greasing control unit with 4kg tank.
- Diagnostic control unit with PLC for alarms management and black box for faults record.
- Discharge opening with oil-pressure activated command with three inductive limit switches (positions: Open, Half-opened and Close).
- Engines high positioned to simplify belts tensioning and the access to the inferior part of the mixer.
- Gas springs to easy lift inspection doors without strain.
